| |
|
|
Job Summary:
|
| |
| Job Type: |
Project |
| Budget: |
$ 20-100 |
| Required
Skills: |
,
,
,
,
|
| Attached
Files: |
(None) |
| |
|
| Status: |
Closed for bidding
|
| |
|
|
|
Buyer Summary:
|
| |
| Username: |
|
| Feedback Score: |
        
2
reviews
|
| Award Reliability: |
14 posted 2 paid |
| |
|
| Location: |
Glastonbury, Connecticut, United States
|
| Member Since: |
October 21, 2009 |
| |
|
|
|
| Invited Users: |
There are no invited users
|
Description
I need a USB port and device that You attach a Pic Microchip to, and when you plug it into the computer, you can click and drag a file on to it, and it will program it to the chip, you can also delete the old file. the microchip and device will be inside an outer shell, and a usb port will have to be on the outside of the shell.
It also has to be a Pcb with pre soldered wires attached and resistors and diodes if necessary. We will request a sample, and then buy in bulk of these.
I will give you more details once accepted. There are around 6 wires, and it should work with 8 pin pic microchip. An ic socket should hold the chip in place.
Any ideas or suggestions will be listened to
If this device can cost less than 1 dollar each, then that would be gratefully accepted. ( it should be less than 1 dollar.)
Thanks! And happy Bidding,
In your bid, Please say about how much it will cost each pcb.
It should be small, less than 15 mm x 18 mm if possible. there could be a cord for the usb that would travel to where it would be on the outer shell.
The project should not cost much to make, The better deal you give me initially, You will make more in the future when we buy regularly in bulk from you!
Thanks!
Reminder
You may not start working in this and any request before
your bid is accepted. Users who violate this policy
may have their accounts permanently suspended.
|
| Shortlist |
| Decline Bid |
|
|
Pune India,
IN
location |
US$500
bid amount
|

         
(2
reviews)
feedback |
20 day(s)
delivery time |

|
| |
Hi we are embedded firm We have done various product for programing AVR ,PIC Controllers .
I Understood your requirement but programmer for 1- 10 piece u will cost about 3-4 USD if bulk quantity is there then it can be goes upto 1.2 -1.5 USD
Bid Time: 12-17-2009 07:23
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
Bangalore,
IN
location |
US$3,900
bid amount
|

         
(1
reviews)
feedback |
60 day(s)
delivery time |

|
| |
I can make this design with USB chip. Each Board will cost around 1$ for 10000 pcs. Manufacturing is seperate. Development charges should be made thru Getacoder escrow account only. Getacoder fee is also yours. Regards Somasundaram.I
Bid Time: 12-24-2009 01:12
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
NJ,
US
location |
US$90
bid amount
|

         
(1
reviews)
feedback |
5 day(s)
delivery time |

|
| |
hi
this is Salman Ali from Skypeek International,
well we are perfect in those kind of stuff. we are basically located in New Jersey, USA.
i m sure if you give us a chance then you will get bet output from our side,
we are waiting for your positive reply.
thanks
Bid Time: 01-14-2010 07:56
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
Chennai,
IN
location |
US$850
bid amount
|

(No Feedback
Yet)
feedback |
20 day(s)
delivery time |

|
| |
As discussed with you
Bid Time: 12-23-2009 23:12
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
Burgas,
BG
location |
US$2,000
bid amount
|

(No Feedback
Yet)
feedback |
30 day(s)
delivery time |

|
| |
I can develop your project based in PIC or AVR microcontrollers for a {descr/string}.99 each one. I will provide electricity scheme and code programs.
Bid Time: 12-16-2009 08:06
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
bangalore,
IN
location |
US$900
bid amount
|

(No Feedback
Yet)
feedback |
10 day(s)
delivery time |

|
| |
hi i am karuna from bangalore (india). i am working Experience in 4 years i have lot of
project completed for digital circuit , analog circuit, analog mixed digital circuit ,medical application circuit , military application circuit . with pcb board.
regards
karunagaran.k
PCB-Designe Engineer
Bid Time: 12-16-2009 22:49
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
Frankston,
AU
location |
US$750
bid amount
|

(No Feedback
Yet)
feedback |
30 day(s)
delivery time |

|
| |
I would like to offer the services of Dimitech Pty Ltd for the successful realization of this project. We specialize in design and prototyping of all types of controllers and specific electronic devices and software.
This bid includes development of the electronic circiut, professionally routed PCB, firmware and a working prototype delivered to you.
Bid Time: 12-20-2009 17:34
|
|
|
|
| Shortlist |
| Decline Bid |
|
|
Ahmedabad,
IN
location |
US$500
bid amount
|

(No Feedback
Yet)
feedback |
10 day(s)
delivery time |

|
| |
Hi JCB, This is Sheena. I have expertise for PCB design and manufacturing. I have almost 10+ yrs of experience of doing it. I have my own design and manufacturing facility for PCBs. Please contact me to get the best possible deals in PCB design and manufacturing.
This can be achieved under 1 dollars if you buy in bulk from me.
please reply me.
Bid Time: 01-13-2010 07:11
|
|
|
|
|
|
|
|
| |
| Get the Free
Step-by-Step Guide on How to Use GetACoder |
The act of
outsourcing jobs has become easy in the past few years
thanks to GetACoder. However, our team aims at making the
whole process even easier. So, it has now come the time to
provide you with a step-by-step guidance on how to use this
service and succeed in the outsourcing world totally for
FREE.
It doesn't matter if you are a more experienced user or a
novice; using GetACoder will become even simpler with the
help of this E-book. There are two major sections: a Buyers
section and a Coders section.
Buyers will learn:
- How to outsource safely
- How to pick the best freelancers
- How to manage time and money
Coders will learn:
- How to get the best jobs
- How to secure their payments
- How to build a long-lasting relationship with buyers
...and MUCH MORE
Clear examples and pictures illustrating key situations,
great tips and real testimonies of some of our best users...
all in this Outsourcing Guide. So don't loose the
outstanding opportunity to download GetACoder FREE E-book.
|

 |
|
GetACoder is a leading Global Services Marketplace doing business in more than 200 countries. Our unique system accelerates your time to market and provides your business with key competitive advantages. When you use GetACoder you are stretching your budget and saving as much as 60% over traditional outsourcing. GetACoder is changing business, now it's no longer about what you own or build but which resources and talent you can access. With GetACoder you reduce expenses, increase efficiencies, aggressively grow your business, and create a sustainable competitive advantage. GetACoder makes outsourcing to any part of the world an easy task! With GetACoder it's simple to outsource any business request, gain access to global talent and manage jobs online. One of the main advantages of GetACoder is the low labor cost. The typically rates are about seven times lower than the ones in the US or Europe. Posting a request at GetACoder allows the right professional or company to find you and to bid for your work. We are building a reputation for exceeding our customers' expectations and for becoming an extremely cost effective way to outsource work. Use GetACoder when you want to save money, increase efficiency or accelerate the development of your request. With GetACoder you focus on growing your business and let others do the tedious work. Post your request on GetACoder for free. Find out why people outsource jobs with us day after day. Thousands of Satisfied Customers - Submit/View Quotes
| - | We've been working on Getacoder for nearly an year now. I'm glad to say that our experience has been entirely positive. The staff here is very professional and is highly interested in doing their best for their customers. I whole-heartedly recommend Getacoder to all prospective buyers and coders. - | | - | Appreciation for conducting such big responsibility. Thanks GAC. - | | - | It is a great website for learning and practice our ability to work and I think it is the best site for people who want professional coders. Thanks GetAcoder team for providing such a professional environment. - |
|
|
| |
© 2004-2012 GetACoder. All rights reserved. |
|